Promoting the safe enjoyment of aviation for pilots, aircraft builders and enthusiasts.
When taking your niece and nephew on a sightseeing flight, ensure a solid preflight briefing, emphasizing no low passes over people, understanding airsickness, maintaining a sterile cockpit, and safe, judicious flying. Avoid distractions and unsafe maneuvers. Prepare and plan carefully for an enjoyable and safe experience. (Word count: 50)
In this article Mike talks about reliability-centred maintenance (RCM) and how maintenance programs were developed for high levels of safety and performance. He points out that RCM is performed in all segments of aviation except the lower end community of General Aviation (think Cessna, Pipers, etc) versus the corporate business sector of GA.
In January, a pilot experienced a dramatic 56C temperature swing affecting runway conditions. After a flight, he landed amid a light crosswind, leading to a tail swing and a slide into a snowbank due to muddy, soft runway conditions. Luckily, there was no damage, only a dirty plane that required extensive cleaning.
After changing the engine oil and filter, ensure there are no leaks. Before starting the engine, check the oil level and verify oil pressure after starting. Taxi forward, make a turn, and check for oil trails. If there's a leak, investigate immediately. After a successful runup, check for leaks again. Never fly without these checks.
In flight training, it's common to have trouble trimming the airplane. An important rule to remember is to wait at least five seconds after changing pitch, power, or configuration before adjusting the elevator trim. This prevents frequent, unnecessary adjustments and ensures the airplane is properly trimmed. Additionally, there are exceptions to the five-second rule, such as when performing a go-around.
The narrator described a flight in November ferrying a Zenair CH250 to Nelson, BC, encountering weather challenges. After failed attempts, a successful flight was made on Nov. 24. The narrator landed in Creston to refuel and appreciated the airport facilities. The flight ended with an eventful landing in Nelson. It was a memorable experience.
The President's Message mentioned the completion of cylinder installation, with successful break-in flights on November 13, 19, and 28, totaling 6.7 hours. The break-in procedure involved flying at low altitude to maintain high manifold pressure. The flights were enjoyable, with no noticeable oil consumption, and the ADS-B Performance Report was passed successfully.
The user experienced unexpected difficulty controlling their Cirrus SR22 during a go-around, recalling smoother training. The response emphasizes the importance of proper power application and managing pitch and yaw during rejected landings. It advises pilots to anticipate control challenges, trim appropriately, and practice go-arounds to enhance safety and confidence.
In the event of a partial power loss during flight, immediate actions include reverting recent changes and following a mental engine failure checklist. Maintain altitude and glide speed while assessing landing options, plan for an emergency landing, and ensure situational awareness. Practice power-off landings to enhance preparedness.
In the quest for a competent flight instructor, remember that you are the customer and have the right to seek a better match if necessary. Professional organizations like NAFI and SAFE can help locate qualified instructors. Building rapport with an instructor is crucial, and persistence may be needed to find the right fit.
Calgary Recreational Flying Club YYC 