Rans S6 Construction

In March 2024, Norm Vienneau discovered a Barnstormer's ad for a complete S6 kit in Campbell River, BC. Accompanied by Wayne Clark, the author inspected the kit, which lacked an engine and instruments. They detail the wing construction, covering methods, and painting process, nearing completion except for engine installation.

Avid Catalina N157AB

Norm Vienneau explored purchasing an Avid Catalina N157AB after discovering it listed for $5,500 and found it appealing to his interest in aircraft. He visited the owner, Mitchell Tucker, in Sedro Wooley but was uncertain due to the status of his Kitfox sale. Ultimately, he purchased a Rotax 912 ULS engine instead.

How did I end up owning a Cessna 172?

In the late 80s, Wayne Winters offered ultralight training with a Merlin aircraft. Ultralights weigh up to 1300 lbs and are costly. In the USA, they require no license, but in Canada, an Ultralight Pilot Permit is necessary. The narrator bought a Cessna 172 without any permits or experience and later obtained a Private Pilot License. They eventually sold the aircraft and assembled a Rans S-12, finding it more enjoyable. The reemergence of Cessna production led to a substantial increase in used aircraft prices.

My Most Rewarding Flight Ever

The author, a pilot with modest experiences, shares memorable moments while flying, particularly his role in a program helping children. He recounts giving a flight lesson to Olivia, a cancer survivor, who had recently overcome significant challenges. The experience was transformative for both Olivia and the author, reinforcing the joy of flying.

Tilt Box

This device measures the relative angle between surfaces, perfect for adjusting pitch angles on propellers. It has a 90° range, 0.05° resolution, and features a hold button. With rare earth magnets for stability, it is compact and retails for $24.95 until April 28, then increases to $34.95.

My Mark IV Avid Flyer

After two years and 349.8 hours, my Avid aircraft project is nearly complete, awaiting inspection. I share my challenges, from acquiring parts, which were often difficult, to constructing components in my unheated garage. While Aircraft Spruce's service was disappointing, I ultimately succeeded in assembly and engine installation. Performance figures will follow post-flight.