Promoting the safe enjoyment of aviation for pilots, aircraft builders and enthusiasts.
The author reflects on their experience as an aircraft owner, highlighting recent maintenance on their Zenair. They detail tasks such as replacing ducting, updating a landing light with an LED bulb, and installing new brake lines. The completion of these tasks promises many trouble-free flying hours ahead, especially during long daylight.
While flying at 5000 feet, the author experienced engine roughness and sputtering, prompting an emergency descent. After investigating potential causes, he discovered severe lead fouling in the spark plugs, attributed to changes in flying habits and the use of 100 low-lead fuel. He replaced the plugs, cleaned others, and improved engine performance by flying at higher RPMs.
The author reflects on four years of using the EchoUAT ADS-B system in their Cavalier aircraft, highlighting its safety benefits and superior situational awareness. Although ADS-B's necessity varies by airspace, the author finds significant value in conflict avoidance and real-time traffic information, asserting the system's positive impact on flying safety and investment worthiness.
Flying IFR requires a certified aircraft and specific equipment, including a dual-com radio, GPS, navigation radio, and necessary instruments. Costs range from $25-$30K for homebuilts to higher for certified planes, plus maintenance fees. Staying current is vital for safety, especially as IFR conditions increase risks like ice. Consider frequency of use before investing.
The author reflects on the challenge VFR pilots face when interacting with IFR aircraft, particularly at uncontrolled aerodromes. IFR approaches follow strict procedures for safety and consistency, which can disrupt VFR traffic. Effective communication and accommodation from VFR pilots can ease conflicts, highlighting the importance of understanding both flight operations for safer airspace management.
An emergency can be declared with ATC in cases of distress or urgency when a pilot feels unsure about the flight's safety. Distress includes immediate threats like engine failure, while urgency involves less critical concerns, such as low fuel or deteriorating weather. Communicating with ATC promptly can provide vital support and resources.
To ensure your charging system functions correctly, consider adding a digital voltmeter, which costs under 30 dollars and easily plugs into your cigarette lighter. It helps monitor voltage levels during flight, identifying issues with the generator or alternator before it's too late. Quality brands, like Anker, are recommended for reliable charging.
Simulators serve multiple purposes for pilots, providing safe and efficient means to experiment with new equipment and techniques, saving time on pre-flight procedures, allowing practice of trip details, and simulating emergency situations. While desktop simulator time may not be logged, it significantly improves and maintains pilot skills.
In this article Mike talks about reliability-centred maintenance (RCM) and how maintenance programs were developed for high levels of safety and performance. He points out that RCM is performed in all segments of aviation except the lower end community of General Aviation (think Cessna, Pipers, etc) versus the corporate business sector of GA.
In flight training, it's common to have trouble trimming the airplane. An important rule to remember is to wait at least five seconds after changing pitch, power, or configuration before adjusting the elevator trim. This prevents frequent, unnecessary adjustments and ensures the airplane is properly trimmed. Additionally, there are exceptions to the five-second rule, such as when performing a go-around.
Calgary Recreational Flying Club YYC 